To integrate your Atios KNX Bridge with Apple Home, follow these steps:
-
Enable Apple HomeKit
- Access the System Settings in the Webinterface
- Enable Apple HomeKit
-
Reboot Confirmation
- Since Apple HomeKit and Matter cannot run simultaneously, enabling Apple HomeKit will automatically disable Matter
- Allow the device to reboot. (This will not affect your existing configuration)
-
Pair with Apple Home
- Open the Apple Home app on your iPhone or iPad
- Tap Add (+) icon and select Add Accessory
- Scan the HomeKit QR code in the Atios Web Interface
- Follow the on-screen instructions to complete the setup
- Once paired, the Atios KNX Bridge will be available in Apple Home, allowing you to control connected devices via Siri and the Home app
If you want to use any other Matter-compatible app, you have to enable Matter.
Be aware that Matter requires a Matter controller. It controls smart home devices. This function is integrated in various products: Smart home hubs from the major Matter supporters (SmartThings hubs from Samsung, Apple HomePod and Apple TV, Google's Nest Hub, and various Echo models from Amazon), certain TV sets and apps.
- Check your local network, and enter the IP address of the Atios KNX Bridge into your Browser address bar to access the Webinterface
- Navigate to the System Settings tab and enable Matter by moving the slider to the right. Since Apple HomeKit and Matter cannot run simultaneously, enabling Matter will disable Apple HomeKit
- Allow the device to reboot. (Your existing configuration will remain unchanged)
- Scan the QR Code with a Matter-compatible app
- Follow the guide to the individual Matter apps for further instructions
- Open the Apple Home app. Make sure your phone is connected to the same network as the Atios KNX Bridge
- Tap Add (+) in the top right corner and tap Add Accessory
- Scan the Matter QR Code in System Settings on the Atios Webinterface with your phone camera
- Choose a room and follow the on-screen instruction to complete the setup
- Open the Google Home app
- Tap Add (+) in the upper-left corner
- Tap Set up device
- Tap New device
- Select your home and tap Next
- Once it prompts on whether you'd like to set up your device, tap Set up a different device
- Tap Matter device for any device type
- Scan the Matter QR code in System Settings on the Atios Webinterface with your phone camera
- Continue the pairing process as indicated in the app
- Open the Apple Home app and tap the dots in the top right corner
- Tap Home Settings
- Navigate to Home Hubs & Bridges
- Select the Atios KNX Bridge and tap Turn on Pairing Mode and Copy Code
- Open the Google Home app which was previously paired with a Nest Hub
- Open the home and add a device via the + button in the bottom right corner
- Tap Matter-enabled device, then No QR Code and paste the code from the clipboard
- Tap Add to Google Home and Add Anyway
- Choose the Accessory Name and tap Continue
- Follow the on-screen instructions to complete the setup
- Open the Alexa app
- Tap Devices
- Tap Add (+)
- Tap Add Device
- Tap Other from the bottom of the list
- Select matter
- To confirm that you have a Matter device, tap Yes
- Scan the Matter QR code in System Settings on the Atios Webinterface with your phone camera
- Follow the on-screen instructions
- Open the SmartThings app
- Tap Add (+) and choose Add Device
- Tap Scan to scan the barcode
- Scan the Matter QR code in System Settings on the Atios Webinterface with your phone camera
- Select the Hub and Room for the device
- Wait for the device to connect with the app
- Once connected select the Wi-Fi or Thread network
- Once connected, you can rename the device and tap Save
- Open the Home Assistant app
- Navigate to Settings > Devices & services
- On the Devices tab, tap Add device button, and tap Add Matter device
- In the dialog, tap No, it's new
- Scan the Matter QR code in System Settings on the Atios Webinterface with your phone camera
- Tap Add to Home Assistant
- You might get a prompt about an Uncertified Accessory. In this dialog, tap Add Anyway
- If prompted, enter a custom Accessory Name, tap Continue
- Once the process is complete, tap Done
¶ Android
- For some devices your phone shows a pop-up, prompting you to Scan the QR code
- Scan the Matter QR code in System Settings on the Atios Webinterface
- When prompted to Choose an app, select Home Assistant
- Once the process is complete, tap Done, then tap Add device
- If you did not see a pop-up, open the Home Assistant app
- Navigate to Settings > Devices & service
- On the Devices tab, tap Add device button, and tap Add Matter device
- In the dialog, tap No, it's new
- Scan the Matter QR code in System Settings on the Atios Webinterface with your phone camera
- Tap Add to Home Assistant
- You might get a prompt about an Uncertified Accessory. In this dialog, tap Add Anyway
- If prompted, enter a custom Accessory Name, tap Continue
- Once the process is complete, tap Done
- By default, the device gets a factory specified name. To rename it, on the device page, select the pencil to edit and rename the device