KNX-DALI Gateway
The Atios KNX-DALI Gateway brings DALI lighting into your KNX installation. Commission DALI luminaires, organises them into groups and change the settings in a browser with the DALI Configurator, no ETS needed.
Key features
- DALI-2 certified and KNX Secure
- Up to 64 adresses and 16 groups
- DT8 colour control: tunable white and RGB/HSV
- Integrated 250 mA DALI power supply
- Commissioning and addressing done entirely in the Web Interface
- Power over Ethernet (PoE 802.3af) or 20–30 V DC
How it works
The KNX-DALI Gateway is installed in the electrical cabinet next to the KNX actuators. Connect it to the KNX TP bus and wire DALI lights to the DALI terminal. Power the gateway over PoE or with a 20–30 V DC supply, open the Web Interface in your browser, and use the DALI Configurator to discover, name and group the lights. Then assign KNX group addresses and groups in ETS and you're done.
INFO
The KNX-DALI Gateway is a KNX-to-DALI gateway. It requires a KNX system and ETS for programming. If you want to control DALI lights via Matter without KNX, use the Atios SmartCore instead.