Frequently Asked Questions
What is the difference between the KNX Bridge and the SmartCore?
The KNX Bridge connects an existing or planned KNX system to Apple Home, Google Home, Alexa and Home Assistant and also acts as a KNX IP Interface and a KNX-DALI gateway. The SmartCore is a standalone controller with DALI, 12 relays and 12 inputs that needs no KNX and no ETS. Go to the product finder on the home page to pick the right one in two questions.
Should I build my new home on KNX or on DALI?
KNX is recommended for larger houses or when heating, ventilation, access and other systems should be integrated. DALI with the SmartCore suits apartments and lighting-focused projects and is generally cheaper and easier to program.
What do I need to control my DALI installation via Matter?
- Atios SmartCore
- One Matter-compatible hub (Apple HomePod, Google Nest Hub, Amazon Echo, Samsung SmartThings hub, etc.)
- Wi-Fi or Ethernet network connection
- The corresponding ecosystem app (Apple Home, Google Home, Alexa, SmartThings)
Do I need both a KNX Bridge and a SmartCore?
Usually not. In a KNX installation the KNX Bridge already covers DALI and Matter. In a non-KNX installation the SmartCore alone is enough.
Can Atios products be used in hotels or multi-unit buildings?
Yes. The SmartCore is designed for apartments, hotel rooms and rental properties. You configure it in its Web Interface and pair it by scanning the Matter QR code.
What is new in the latest hardware?
The latest hardware (KNX Bridge ADE-KD-1.1, SmartCore ADE-R12-2.0) has a second push button and a second status LED. The DALI Button switches all DALI lights on and off, and the DALI Status LED shows the state of the bus. The built-in DALI power supply is 250 mA on every revision.
Can I try the interface without buying hardware?
Yes. Try the Web Interface online, without a device, at https://r12.atios.ch/app/.
Can I power the SmartCore over PoE, and can I use its 12 V for sensing?
Yes. The SmartCore accepts standard PoE on its Ethernet port and needs no separate 20-30 V DC supply. When powered via PoE, the + terminals of the DC PWR block carry 12 V DC. You can use them to supply the switches on the inputs, so you need no second power supply. Go to Powering inputs from PoE.
Do not connect PoE and an external DC supply to the SmartCore at the same time.
Do Atios devices require an internet connection?
No. Atios devices work entirely on your local network and do not require an internet connection. Matter also operates locally, so your home continues to function normally even when the internet is down. An internet connection is only needed for remote access via smart home apps when you are away from home and for firmware updates.
My device doesn't start on PoE but works on DC. What now?
Try another PoE switch or injector that meets IEEE 802.3af. In the meantime, you can power the device from the DC input. Never connect PoE and DC together. If the device still does not start on PoE, contact Atios support.
How do I find my device on the network?
Open setup.atios.ch on a device in the same network; it discovers the Atios device even with a changing DHCP address.
The LED blinks green and there's no IP. What now?
A blinking green LED means the device is still establishing its IP connection. Check the network cable and the switch port, and check that your router's DHCP server is running. Then reboot the device. If it still gets no IP address, you can factory reset it: hold the Reset Button for 10 seconds until the LED blinks purple, then release it. A factory reset deletes the configuration of the device, so use it as a last step.
How do I switch to Wi-Fi?
Select Wi-Fi in network settings and reboot; a blinking white LED shows the setup access point. Connect with your phone and enter your 2.4 GHz credentials.
How do I configure HomeKit or Matter?
Go to the SmartCore Pairing Guide. It covers pairing with Matter and with HomeKit.
Should I pair via HomeKit or Matter?
Use Matter if you want Google Home, Alexa, SmartThings or Home Assistant, or more than one app at the same time. Matter is the recommended mode. Use HomeKit only if you use Apple Home alone and need an accessory type that Matter does not cover yet, such as a garage door. Door locks work over Matter. HomeKit and Matter cannot run at the same time, and switching from one to the other resets the pairing.
How do I add a new device after pairing?
Add it in the Accessory Manager, save and reboot. It appears in your app automatically; do not re-pair or remove the bridge.
Can I add Matter devices that aren't connected to the SmartCore?
Yes. Any Matter-compatible device, such as sound systems, cameras, door locks, robot vacuums or smart plugs, can be added to the same smart home app (Apple Home, Google Home, Alexa, SmartThings) next to the devices of your SmartCore. They appear in the same app and operate independently of the SmartCore.
My SmartCore relays show up but not the DALI lights.
Add each DALI light or group in the Accessory Manager, save and reboot. The DALI Configurator alone does not expose lights to Matter.
Why does Apple Home say the accessory is not certified?
The warning only appears in HomeKit mode, which is built on Apple's official SDK but not HomeKit-certified so that garage doors can be supported. The device is Matter certified, and Matter pairing shows no warning.
Why are all devices in the same room?
Apple Home and SmartThings ask for one room when you pair the bridge, and all its accessories start in that room. Move each accessory to its own room in the app.
Where is the slat angle in Apple Home?
Open the blind's accessory settings; the tilt slider is there. Apple does not show it on the main tile.
How do I trigger an Apple Home scene from a wall button?
Create a Programmable Switch accessory for the button and assign the scene to the press in Apple Home.
Does Apple Adaptive Lighting work with DALI tunable white lights?
Yes, when the device is paired to Apple Home via Matter (iOS 18 or later); Adaptive Lighting is then offered automatically. It is not available with HomeKit pairing.
Can I use double press or trigger scenes?
Yes, via Matter: add the input as a Programmable Switch and assign actions to single, long and double press in Apple Home, Google Home or Home Assistant.
Can the Atios SmartCore read the status from DALI lamps?
The SmartCore can read the status of individual DALI lamp addresses. However, DALI technically does not support reading the status of DALI groups. In that case, the SmartCore monitors DALI push button or sensor telegrams to infer group state and sync the status accordingly.
How do I bring Casambi lights into Apple Home or Home Assistant?
Use a Casambi CBU-DCS gateway on the DALI bus. Casambi lights get DALI addresses in the Casambi app and are then exposed via Matter. This works for Casambi-enabled luminaires, including Occhio Air fixtures. One limitation: the up/down fading command is not available through a Casambi DALI gateway. Go to the Casambi integration guide for setup steps.
Do Atios devices support DALI DT8 (tunable white and colour control)?
Yes. The SmartCore supports DT8 drivers for tunable white and colour control. It needs a DT8-capable DALI driver in the fixture.
Does the device power the DALI bus?
Yes. Each device has an integrated 250 mA DALI power supply. You switch it on in System Settings. If the bus needs more current, use an external DALI power supply and switch the internal one off. Never run both at the same time, because two supplies on one DALI bus can damage the bus hardware.
Can non-dimmable lamps be used in a DALI system?
Yes, but only on and off.
- With the SmartCore, wire the lamp to one of its relay outputs and add it as a Lightbulb accessory.
- On the DALI bus, use the Atios DALI-2 Relay Module. It fits a standard wall box and uses one DALI address. Its relay contact is normally closed, so the lamp is on in the factory state. At 230 V AC it switches up to 300 W of LED load. In the SmartCore, address it in the DALI Configurator first, then add it as a DALI Relay accessory.
How many DALI lights can one SmartCore control?
Up to 64 control gear, such as the LED drivers of your DALI lights, and 16 groups per DALI line. The same line also takes up to 64 control devices, such as sensors and push-button couplers. These are DALI standard limits.
What if I have more than 64 lights or need more than 16 groups?
Use a second DALI line, that is a second SmartCore. All devices from both units appear in the same Apple or Google Home.
Can the SmartCore be used with Lunatone DALI Cockpit?
Yes. The SmartCore emulates the DALI-2 IoT WebSocket interface used by DALI Cockpit for commissioning, but not the Lunatone REST API.
The DALI scan finds no devices. What should I check?
Check the DALI Status LED: solid green means the bus is powered and connected, solid red means no bus power, solid yellow means overload. Use only one power supply on the bus, either the internal 250 mA supply or an external one, never both. Check the wiring, then press the DALI Button to switch all lights on and off. A light that does not react has a wiring or supply problem, so fix that before you scan again.
How do I add new DALI luminaires to an existing installation?
Open the DALI Configurator, start the DALI Wizard, choose Scan for DALI Devices and click Scan. The scan keeps the existing addresses and finds the new lights. Do not choose New DALI Installation, because it clears all addressing. Click Write and Save Project. On the SmartCore, add the new lights in the Accessory Manager.
Which DALI-2 push-button couplers and sensors work with the SmartCore?
The SmartCore is the DALI-2 controller for up to 64 control devices on its DALI bus. An example is the Atios DALI-2 Button Coupler. It uses one address for its four push-button instances and reports their events to the SmartCore. Address the device in the DALI Configurator, then add each button to a light, a blind or a Programmable Switch in the Accessory Manager.
Can a DALI push button trigger a scene?
Yes. Add the DALI-2 button as a Programmable Switch accessory and assign the scene in your Matter app. The SmartCore sends single, double and long press to the Matter app as separate events, so each press type can trigger its own scene.
Why is my DT8 light detected as DT6?
The device type comes from the driver itself. Many LED drivers are not DT8-capable, and then tunable white and colour cannot be offered. Some drivers also have a selectable device type, so check the driver's datasheet or ask the luminaire maker. On the Atios DALI LED Strip Driver, set the mode on the display to a DT8 mode that fits your load, such as tc for tunable white or H4 for RGB, instead of t6. Then run the DALI Wizard again.
Can I combine two DALI addresses into one tunable white light?
Not natively. A tunable white light needs a DT8 tunable white driver on one DALI address. For example, the Atios DALI LED Strip Driver in tc mode runs a warm white and a cold white strip as one tunable white output.
How many Casambi lights are supported?
Up to 64 per device. Casambi luminaires bridged through a CBU-DCS take control gear addresses on that bus. They share these 64 control gear addresses with any hard-wired DALI lights.
Is status from Casambi switches reported back?
Yes, when the CBU-DCS status export to DALI is enabled; changes show in Matter apps in under a second.
Can I use TRIAC-dimmable lights in a DALI system?
Not directly, because a TRIAC-dimmable driver has no DALI input. Either dim it with a DALI phase-cut dimmer such as the Atios DALI AC Dimmer, or replace the driver with a DALI driver. The Atios dimmers work on the trailing edge (reverse phase), so check first that the lamp or driver supports trailing-edge dimming.
How do I control LED strips?
Use a DALI LED driver on the bus; each strip gets a DALI address and can be dimmed or colour controlled if the driver supports it.
Is PoE enough to also power the DALI bus?
Yes. With the internal DALI power supply enabled, the device draws about 5 W in total, which a standard PoE 802.3af port can supply.
Which cable should go to each light for DALI?
A DALI luminaire needs mains (L, N, PE) and the two DALI wires. A 5-core cable brings both to the light outlet, so you can use DALI there now or later. If you do not run 5-core cable, reserve a conduit for a later DALI cable. Check your local wiring rules for mains and DALI in one cable.
What can a wall button do on the SmartCore without an app?
Short press toggles on/off and long press dims up or down; buttons can control DALI lights, relays and blinds even when the network is down.
Are the SmartCore's relays and inputs dry contacts?
Only the relays are dry contacts. All 12 relay outputs are potential-free and rated 16 A. The 12 digital inputs are opto-isolated and sense a voltage from 12 V DC up to 230 V AC against the COM reference of their input group. Inputs and outputs are electrically isolated from each other, so they can run on different breakers, phases and voltages.
To wire a switch to a DC input, connect the COM of the group to the minus terminal of the DC supply. Wire the switch between the plus terminal and the input terminal. For an AC input, connect the COM to neutral and wire the phase through the switch to the input terminal. Go to SmartCore wiring for diagrams.
Can I mix 230 V and low-voltage buttons?
Yes, inputs are optically isolated and the two input groups have separate COMs, so different voltages and phases can be used. Within one input group (inputs 1 to 6, inputs 7 to 12) use one voltage type: all DC or all AC. Relays can switch different voltages and phases too, for example a 230 V AC load on one relay and a 24 V DC load on the next. Inputs, outputs and the power supply are isolated from each other, so they do not need to share a breaker, neutral or phase.
Can a button on one SmartCore control lights on another?
Yes, through your Matter app. Add the button as a Programmable Switch accessory on the first SmartCore. Then create a scene or automation in your app that switches the lights on the other SmartCore. Apple Home, SmartThings and Home Assistant fully support Programmable Switches. Google Home and Alexa support them partly.
How do I add more relays to the SmartCore?
Add DALI relay or blind modules on the DALI bus; they can also be installed near the loads, outside the cabinet.
Which door locks work?
Use a motorised lock with a control input and a sensor output. Wire the lock to a relay output and add a Lock accessory, with an optional status input and an inching lock time for impulse locks. Avoid locks that only work over Bluetooth, because they have no wired input.
Can I integrate my door intercom?
Atios devices do not carry video. You can still use the bell and door-open contacts of an intercom. Wire the bell contact to an input and the door opener to a relay output, then add them with the Lock accessory, which has an optional doorbell input. A video intercom or camera that supports Matter or HomeKit is added to your smart-home app directly.
Does the device have timers or logic?
Timers and automations are created in your Matter app, which needs a home hub. The only built-in timer is the SmartCore's optional 'Turn off after' delay on each switch, outlet and light accessory.
Can a button only switch off (all-off) instead of toggling?
There are two ways. Run the Atios DALI-2 Button Coupler in application controller mode. With a DALI configuration tool, give the button the OFF command and a broadcast as target. In this mode the coupler no longer reports its button events to the SmartCore. Or add the button as a Programmable Switch and let an automation in your Matter app switch the lights off.
How many blinds can one SmartCore control?
Six on the relay outputs. A blind or shutter motor uses two relays, one for up and one for down, and the SmartCore has 12 relays. You can add more blinds with DALI-2 blind devices on the DALI bus. A motor with a separate stop input uses the Motor Control accessory, which takes three relays.
Can I set percentage position and slat tilt?
Yes. Enter the full travel time (and tilt time for venetian blinds); positions are calculated from it.
Can the SmartCore control a garage door?
Yes, with a relay impulse and a reed contact on an input for open/closed state; it appears as a garage door in Apple Home.
Can the relays switch DC loads?
Yes. Each relay is potential-free and rated 16 A at 250 V AC, and each relay can switch its own voltage. Go to Wiring for an example with a 24 V DC load.
Does the SmartCore support Modbus or HVAC control?
Not natively. The SmartCore has no Modbus interface, and the Accessory Manager offers no thermostat. Use a Matter-capable HVAC unit or Home Assistant for that. Relays can switch a valve (Valve accessory) or an AC dry contact (Switch accessory).
Can the SmartCore report energy consumption?
No. The SmartCore does not measure or report energy consumption.
Why do I need to reboot after changing the configuration?
The accessory list is loaded at startup, so changes take effect after Save Configuration and a reboot.
How do I factory reset the device?
Press and hold the Reset Button for 10 seconds until the Power LED blinks purple, then release. The LED turns solid purple while the device resets. You can also use Factory Reset in the Web Interface under System Settings. A factory reset deletes all configuration and pairings, so export your configuration first.
My device is stuck in a boot loop. What can I do?
Look at the Power LED: solid blue means the device is booting. Power the device from a PoE port or DC supply and test the network cable. If the device keeps rebooting, hold the Reset Button during boot until the LED is solid yellow. This enters safe mode. If the device does not recover, contact support with the serial number.
Why does my update revert after rebooting?
After installing, the device needs 2 minutes to confirm the new firmware. Rebooting earlier reverts to the previous version.
Can I roll back a firmware update?
Yes, the previous version can be restored. Contact support with your serial number if you need a specific version.
My device reboots or freezes after an update. What should I do?
Update to the newest firmware first. If the problem continues, start Debug in System Settings and export your configuration. Then contact support with the serial number and the debug log. After an update, wait at least 2 minutes before you reboot.
How do I back up my configuration?
Open System Settings in the Web Interface and export the configuration. To restore it, import the file in the same place.
Can my installer or Atios access my home?
Atios has no access to your home. Control is local and encrypted, and only people you invite in your Home app can control it. Your installer cannot see or control your home through the app unless you share it with them.
These questions are the same on every Atios device FAQ page.
Matter & Apps
What is Matter?
Matter is an open smart home standard that lets all Matter-certified devices work together over one protocol. Apple, Google, Amazon, Samsung and Philips back it, and it works with Apple Home, Google Home, Samsung SmartThings and Alexa, so you can choose your platform.
What's the difference between a Matter controller and a Matter bridge?
Matter controller: manages Matter devices, provides user interfaces, and executes automations and scenes. Controllers are typically platform-specific (e.g. Apple HomePod works with Apple Home, Google Nest Hub works with Google Home).
Matter bridge: translates other systems and protocols (for example Zigbee or Z-Wave) into Matter, making those devices accessible to controllers. A bridge does not provide a user interface or control function on its own.
Atios devices that connect to Matter act as Matter bridges. You also need a Matter controller (HomePod, Nest Hub, Echo, etc.) from your chosen ecosystem.
Note: Some products can be both a controller and a bridge simultaneously.
Is there an Atios app?
No. Atios devices work with existing apps such as Apple Home, Google Home, Alexa, SmartThings and Home Assistant.
Do I need a HomePod or Apple TV?
Not for local control from your iPhone. You need one for remote access, automations and sharing the home with others.
Do I need a hub for Google Home?
Yes, Google Home needs a Matter-capable Nest device to add and control Matter devices.
Does it work with Homey and SmartThings?
Yes. SmartThings and Homey Pro are both Matter controllers, so you pair the Atios device with Matter.
Do I need a Thread Border Router?
No. Atios devices connect to Matter through your home network, not through Thread. You only need a Matter-compatible hub (HomePod, Google Nest, Echo, etc.).
How do I use Apple Home and Google Home at the same time?
Pair with the first app via Matter, then use its 'pair another app' function to get a new code for the second app. Do not scan the original QR code again. Matter's multi-admin feature lets one Atios device work in several apps at the same time. Each app keeps its own automations and scenes, which do not sync between the apps.
Can one device serve two apartments as separate homes?
No. One unit is one Matter bridge, and every home or app you pair it with sees all of its accessories. Two separate apartments need two units.
The QR code is not accepted. What can I do?
Enter the numeric pairing code from the Web Interface manually. If the device was paired before, reset the pairing first.
Google Home says 'Unable to add bridge'. What should I check?
Make sure you have a Matter-capable Google hub, the device rebooted less than 15 minutes ago, and your phone and the device are in the same subnet without blocked mDNS. Update the device to the latest firmware first.
Firmware & Troubleshooting
How do I report a bug or request a feature?
Send bugs to the support mailbox and post feature ideas on the Atios subreddit.
Privacy & Security
What data is sent to Atios?
Only connection data such as IP address, serial number and firmware version at reboot and update checks. No usage or home data, and the device works if blocked from the internet. The connection data is encrypted and never shared. Go to our Privacy Policy for details.
Pricing & Warranty
Do I have to pay monthly fees?
No. There are no subscription or monthly fees of any kind.
Are firmware updates free?
Yes. All software and firmware updates are free of charge.
Do I get a warranty?
Yes. All Atios products come with a 3-year warranty. Within this period, the item will be repaired, replaced, or credited according to our terms and conditions. Please contact us to claim your warranty.
My device arrived damaged. What should I do?
Send photos and the serial number to support. Atios offers a replacement, repair or partial refund.
How do I return a product?
You can return products within 100 days. Contact support with your order number and we send you the correct return address (EU or Switzerland). After we receive and check the device, the refund is issued to your original payment method, usually within two weeks.
Why does the shop show a higher price than I expected?
The Swiss shop shows prices including Swiss VAT. When you enter a delivery address outside Switzerland at checkout, Swiss VAT is removed and the correct price for your country is applied.
Are project prices available?
Yes, volume pricing applies for multi-unit projects; contact Atios with unit count and a sample room list.
Ordering & Shipping
How fast do you ship?
Products in stock ship within 1-2 working days after payment, with tracking by email. EU orders ship from Germany, others from Switzerland.
Do you ship outside Europe, and who pays duties?
Yes, we ship worldwide, usually by UPS with tracking. Import duties, tariffs and local taxes are charged by the carrier or customs in your country and are paid by the recipient. We cannot predict the exact amount, as it depends on your country's rules.
Will I pay customs or import VAT when ordering from the EU?
EU orders are shipped from our warehouse in Germany, so there are no customs formalities or import VAT on delivery. Only shipments sent from Switzerland are charged import VAT and a handling fee by the courier. If you are unsure where your order ships from, contact us before ordering.
I have an EU VAT ID. Can I buy without VAT?
Yes. Business customers with a valid EU VAT ID can be invoiced under the reverse-charge procedure and account for VAT in their own country. Enter your VAT ID at checkout or ask us for an invoice; German business customers receive an invoice with German VAT.
Which HS code should I use for customs?
Contact us for the HS code of each product and for a commercial invoice if your customs broker needs one.
My parcel is held at customs. What should I do?
Forward the carrier's or customs office's message to support so we can supply the required documents directly. Most holds are resolved by providing invoice details or a product description.
Can I buy through my electrical wholesaler?
Yes, our products are listed at several electrical wholesalers. If yours does not stock them yet, order directly from us and we can deliver to your wholesaler or to site.
Partners & Resellers
Is there an installer near me who knows Atios products?
Contact us with your location and project details and we connect you with a partner or distributor in your area. Where we have no partner yet, any qualified electrician can install our products, and we support them remotely.
Does Atios install or commission systems itself?
We offer remote commissioning via screen sharing for a flat fee or hourly rate, and for larger projects we can come on site or work with partner installers.
Why must I buy through a local distributor in my country?
In some countries we work with an exclusive distributor who handles sales, stock and local support. They can also help you find a certified integrator.
Do you have installer or integrator pricing?
Yes. Professionals get a discounted first sample via a voucher in our shop, volume discounts from 3 and 10 units, and project pricing for larger orders. Contact us with your company details to receive your terms.
Can I get a free demo unit?
We don't offer free or loan units, but professionals can buy a sample with a discount voucher and return it for a full refund within the return period if it is not a fit.
Is there a B2B portal?
Partners order by email with a pro forma invoice. Contact us for partner access.
How can my company become an Atios distributor?
Contact us with your country, your current product portfolio and expected volumes. We first check whether an existing partner covers your territory, then usually start with a discounted sample and a call about cooperation.
Do distributors get exclusivity?
Exclusivity is granted case by case depending on market commitment and volumes. In several countries we work non-exclusively with multiple partners.
Where can partners get flyers and product data?
Partners get access to a shared marketing folder with current flyers, datasheets and product images. Digital flyers can be localized with your logo; printed flyers can ship with your order.
How do I list Atios products at my wholesaler?
Send us the wholesaler's article-creation form and we fill in item numbers, EANs, images and datasheets so the products can be listed.